Polygon ginawa bisa kwatance da kuma nisa a wani Excel tebur

Bari mu ga abin da ma'anar ita ce:

Ina da bayanan wucewa tare da kai tsaye da nisa, kuma ina so in gina shi a cikin AutoCAD ko Microstation. Mun ga wannan AutoCAD a baya Yana da nau'i don ciyar da irin wannan bayanan ƙarƙashin tsarin @dist <yayin da yake a Microstation ana yin sa ta hanyar AccuDraw.

To, a mayar da martani ga abokinmu Yakubu, ga teburin nan:

autocad ya wuce microstation

1 Bayanin shigarwa

An shigar da waɗannan a ƙarƙashin yankin rawaya, a nan ka shigar da tashoshin, nisa da kuma jewa misali.

2 Haɗin farko

Wannan yana cikin taken yankin a kore, muna ɗauka cewa mun san daidaito na farkon batun. Idan baku da shi, sanya kowane ƙima, zai fi dacewa don kada daidaito tsarawa ya bayyana, kamar 5,000 (dubu biyar)

3 Bayanin fitarwa

Wannan ita ce yankin da aka nuna a orange, inda abin da kuke da shi shine haɗin gizon x da y tare da raguwa.

4 Yadda zaka aika zuwa AutoCAD.

Mai sauƙi, "kwafin" an yi shi a yankin lemu na babban fayil ɗin, sannan a AutoCAD an kunna umarnin polyline (pline) kuma ana yin "liƙa" a cikin sandar umarni. Sakamakon shine an tsallaka ne kawai don bayar da ƙarshen rufewa

autocad ya wuce microstation

 

Anan zaka iya sauke samfurin don gina polygons bisa tushen da nisa a cikin tebur na Excel.

hanyoyi zuwa Taswirar kwance

Yana buƙatar gudummawa ta alama don saukarwa, wanda zaku iya yi da shi Katin bashi ko Paypal.

Shi ne m la'akari da darajar da shi na samar da sauƙi da wanda za ka iya saya.

 

5 Yadda za a aika shi zuwa Microstation

Don yin shi a Microstation Na halitta samfurin wanda yayi kusan abu guda ɗaya, amma a cikin mahimmancin umarnin Microstation Key-in.

Duba samfurin don Microstation.

 


Koyi yadda ake yin wannan da sauran samfura a cikin Excel-CAD-GIS hanya mai cuta.


 

 

58 Amsawa zuwa "Gina Polygon bisa la'akari da bugowa da nisa a teburin Excel"

  1. Ina da matsala Lokacin da na samo samfurin komai yayi aiki daidai, wannan ya kasance kamar shekaru 4 ko 5 da suka gabata,
    Na yi amfani da shi ba tare da matsaloli ba. A halin yanzu ba ya aiki a gare ni lokacin da na liƙa shi a cikin Autocad. Na gwada a cikin Autocad 2013 da 2017 kuma babu komai. Ban sani ba idan dole ne in gani kuma nayi kyau, Ina amfani da 2019. A baya nayi amfani da 2016.

  2. Tuni bada taimako, Ta yaya zan sauke fayil din?

  3. barka da rana ba zan iya canja wurin ba saboda matsalar adireshin kamfanin da zan sanya gaisuwa

  4. Sannu daren dare kamar biyan bashi ta wurin canja wurin idan na yi shi tsaye a bankin to wacce lambar asusun na saka godiya na gamshe ni

  5. Duba adireshinku, wani lokaci yana zuwa spam.
    Ya kamata ku sami saƙo tare da url ɗin download, wanda ya ƙare a cikin kwanaki 4.
    Idan kuna da matsaloli gaya mana editan (at) geofumadas.com

  6. Na biya biyan bashin. A ina zan iya sauke samfurin?

  7. Ina so in gaya maka ka aika da kudi ta hanyar Pay Pal a cikin sunanka don samfurin Excel

  8. Da safe ga dukan mutane da kuma gaisuwa don wannan aikin.
    Ina da tambaya

    Yaya zan yi a MICROSTATION don kada in bar masifar maki ba har ma da layin da zai sanya polygonal?
    gracias.

  9. Shin kowa ya san yadda za a shigar da dukkanin bayanai yanzu?
    AYUDAAAAAAAA

  10. Gaskiya ne, zai iya aiki don kowane shirin da ya yarda da haɗin kai a cikin wannan tsari.

    Akwai yiwuwar akwai kari ga ArcGIS, amma ban taba magana game da batun ba a nan.

  11. Sannu, ku kawai ya ceci rayuwata tare da wannan sakon, Ina buƙatar yin polygonal a ArcGIS don haka sai na yi amfani da wannan hanya kuma na daidaita shi kawai don ArcMap, Ban sani ba idan akwai hanya mafi sauki don yin wannan shirin ko kuma idan kun riga an buga wasu post game da wannan, amma ya taimake ni mai yawa, zai zama da kyau idan sun kuma sanya post ya mika shi zuwa ArcGIS. A ƙarshe, na gode sosai !!! taya murna akan wannan shafin, hellooooos.

  12. Na gode…!!
    Don taimako, yanzu idan an bar polygon… ^ _ ^

  13. Cewa ku canza shi a cikin Windows

    Fara, kula da panel, gida

    Bayan haka, za ka zaɓi ƙasar da kake kuma tare da wannan ya kamata ka sami madaidaicin maki da waƙoƙi a yankin launin toka, a ƙasa inda misalai suke. Da farko akwai lambobi.

    Idan akwai alama ba daidai ba, har ma zaɓin ƙasar ku, sannan danna maɓallin "tsara" sannan akwai canjin yanayin alamar ƙira da dubunnan alamar rabuwa.

  14. Ina da matsala don samun zane a autocad, matsala ta fadi a cikin wadannan.
    Matsalar ta kasance a cikin tebur na ofis na ofishin Ina bukatar in san yadda za a canza lambar (,) ta Point (.) Ina da ofishin 2007.
    Ya bayyana a gare ni kamar haka:

    418034 (,) 128,1590646 (,) 877
    418028 (,) 562,1590680 (,) 724
    418034 (,) 064,1590699 (,) 614

    inda dole ne lokaci (.) akwai comma (,) taimaka mani yardar. !!

  15. Sannu kowa da kowa, Ina da shekaru da yawa na yin amfani da MicroStation don cadastre kuma kawai ina so in ƙara zuwa kyakkyawar gudummawar abokan aiki waɗanda idan suna son ƙarawa ban da abubuwan polygon, hanya tana da sauƙi. A cikin takaddun jakar rubutun mun rubuta "wuri smartline", ga kowane daidaitawa muke ƙara xy = x daidaitawa, y daidaitawa. don haka ga duka. A cikin shigarwar Mabuɗin mun rubuta @C: \ sunan da wurin fayil ɗin. Tace Wannan shine ka'idodin hanyar in har wani ya san wata hanyar zai yaba da shigarwar.

  16. Ina buƙatar yin shirin a autocad .. saboda na shiga haɗin gwiwar da x kuma na sa jirgin ya harbe

  17. Na gode wa dan uwan ​​don taimako, ina da yawa aiki tare da wannan tebur, taya murna ga ci gaba da dabara, aiki mai kyau ..

  18. Ta yaya, ina da shafin yanar gizo na microstation, ban sani ba idan zaka iya taimaka mini tare da hanya kuma ina kokarin dan kadan amma yana da kayan aiki da dama.
    Na gode.

  19. Abin godiya mai godiya yaro yana neman shafin yanar gizon microstation kuma yaron ya yarda

  20. To na ga ya ban sha'awa, kamar yadda ka shirya, ina da matsala ba zan iya samun wani akwatin yi (bearings da nisa) na wani polygonal da realizadaen MicroStation v8 xm ko v8i, kamar yadda aka yi a Civilcad kawai tebas da kayan aiki polygon kuma ba samar da shingen gini da zane a cikin zane ko launi, za su kai farmaki da su zai taimake ni

  21. Ban ga wani sakon da yake yi ba, wanda zai iya taimaka maka wannan ne . Lambar ba ta da kalmar sirri, don haka sai ka gyara shi domin ya ba ka sauran bayanan, ko kuma ka bar shi a shafi abin lura tare da aikin da aka ambata.

  22. g

    Na gode, amma ina tsammanin ina bukatar in bayyana wani abu, Ina so in guji yin shi da hannu, wanda aka sarrafa ta ta amfani da Lips, wanda zan kaddamar da bayanan da ke shigo da fayil din.

  23. To, na gane cewa idan dai wannan layin ne, kawai kuna yin:
    - Layin umarni
    - shiga
    - 227935.1665,9111959.809,2618.718896
    - shiga
    - 227935.1665,9111959.809,2618.718896
    - shiga
    sa'an nan kuma ka sanya bayanai a kafa a matsayin rubutu.

  24. g

    Na KASHE KO KO KUMA KUMA YA YI A CIKIN SHIRYE SHIRI. KYAU so su san idan na iya taimaka graphed Wadannan bayanai IN Excel AutoCAD, ME zana layi tare da dukan bayanai ID, tsarawa saman LINE, Length, Azimuth da kuma karkata (incl) daga XY jirgin sama.
    TAMBAYOYIN KUMA YA YA KUMA.

    IDAN KARANTA KYAUTA SA'AD KYAUTA. »« AZIMUT »« INCL. »
    01 227935.1665 9111959.809 2618.718896 150 84.295 -19.22
    02 227935.1665 9111959.809 2618.718896 130.25 84.295 -19.22

  25. Ina taya ku murna, shafi ne mai kyau kuma sama da duka tare da bayanai masu amfani sosai ga waɗanda muke sadaukar da kansu ga wannan yanayin da yanayin ƙasa ...
    Na kuma bincika bayanan da kuke da su game da amfani da yanayin ƙasa (ko gedesics) da UTM ... Ina ɗan ƙoƙari tare da sauyawa daga Geographical zuwa Topographic, ma'ana, Ina so in juya daga geodesics zuwa flat system, ta irin wannan hanyar da maki ko bangarorin da muka sanya kuma muka sanya su bayan aiwatarwa, za mu iya amfani da su tare da tashar gaba ɗaya ko kowane kayan aiki na yau da kullun da kuma duba nesa ko daidai ... maganganunku na da taimako ƙwarai ... godiya da gaisuwa daga tampico, tamaulipas, mexico ...

  26. Abokai nagari na so in san idan za ku iya taimaka mini kamar yadda zan iya haɗuwa da hannu daga gps zuwa autocad

  27. Idan haka ne, watakila zai duba a cikin kwamandan kulawa, a cikin gida, kuma ku ga idan alamu suna kama da dubban dubban mutane da mahimmanci.

  28. Ka sani ina tsammanin matsalar ta ta'allaka ne da daidaita waƙafi da lokaci…. daga Excel

  29. ok godiya, komai ya zama cikin nutsuwa….
    kunyi daidai kuskuren shine yayin kwafin bayanan ba daidai ba ... dubun godiya ...

  30. Ka duba tsarin abin da kake yi:

    Umurin umarni (ko layi)
    Za ka zaɓi yankin a cikin tarin
    Kwafi
    Danna kan layin umarnin AutoCAD
    Manna

  31. Ban yi kuskure ba da buga bayanan daidai, wani abu yana faruwa, ah Ina da wani tsari a ƙalla wanda yake da matukar fa'ida don yin jigilar abubuwa a cikin tashoshi suna da kama da wannan tsari amma a dukkan ɓangarorin biyu na sami wannan saƙo »Maɓallin 2d ko maɓallin keyword wanda ake buƙata» lokacin da na je tudun qasa, ban fahimta ba?
    Idan kanaso ka tsallake tsarin zuwa yayi kyau kawai ka rubuta email dinka….
    yana da matukar ban sha'awa ..
    AAA IDAN KA SAMU MAGANIN WANNAN MATSALAR, Ka yada shi….

  32. Ina da wani tsari kwatankwacin wannan, shi ne daidaita hanyoyin mu tafi zuwa kasar autodesk ta yi daidai da wannan tsari. polygon dina bai bayyana ba, kuma bana yin kuskure wajen kwafin bayanan. IDAN KUNA SON WUTA A FILE A CIKI, RUBUTA E-mail E IL.

    AAA DON ALLAH IDAN KA TUNA SAMUN MAFITA, TA WUCE, BAN SANI BA IDAN MATSALAR TA HANYAR AUTO CAD NE KO WANI ABU NA FARUWA A CIKIN EX.

  33. Joshuwa, na gaskanta cewa kuna kwashe ɓangaren da ba daidai ba, dole ne ku kwafi abin da aka alama a orange

  34. Maballin 2d ko maɓallin zaɓi na zaɓi kuma ya bayyana gare ni kuma ban sami mafita ba idan kun san shi, da fatan za a taimake ni, yana da gaggawa, don Allah …….

  35. Kyakkyawan fayil zai yi mini hidima da yawa kuma na riga na tambaya abin da nake tambaya game da yadda za a canza ɓangarorin zirga-zirga da matakin zuwa UTM…. Zan gwada shi don buɗe hanya

    jcpescotosb@hotmail.com

  36. Zai yuwu kuna da waka da wayan tsari daidai ba, wannan ya kamata a tabbatar dashi a cikin tsarin kulawa, saitin yanki. Zai yi amfani idan kuna da maki kamar rabuwa da kalmomi da waƙafi kamar rabuwa dubbai.

  37. Na yi gwajin a cikin Autocad 2009 kuma ya yi aiki mai kyau amma microstation ba
    Zai zama cewa ban yi abin da ke daidai ba a cikin Microstation V8 xm.

  38. Bari mu ga:
    1 Umurnin umarnin Polyline
    2 ka rubuta 0,0
    3 shigar
    4 Kwafi a cikin yanki na orange na babban takardar
    5 danna kan layi
    6 manna ko ctrl + v
    7 kunna cikakken duba zuƙowa

    Idan ba ta aiki, wani abu mai ban mamaki ya kusa. Wani zaɓi kuma da zai iya shafarwa ne takalmarka ko kuma lokutanku sun rikice cikin abubuwan rarrabuwar dubunnan da desimim.

  39. WANNAN BAYANAI

    MUTANE YA YA YA YA KUMA KUMA KASA TOPOGRAPHIC COORDINATES TO AUCTOCAD.

    SA'AD na danna CIKIN SA'AD na je Kuma N zabi FASAHA KYAUTA 0,0 KYAUTA NUFIN DADI MAI YADDA AKE YI WANNAN [Arc / Halfwidth / Length / Rage / Width
    KUMA NA YI MAGANIN OMISO ZUWA WANNAN KYAUTA DA PEGO KASANTA ZAI YI A WANE (Batun 2D ko maɓallin zaɓi ake buƙata) Ban sani ba SAN YADDA ZAKA SAMUN LABARIN POLYGON NUNA NUNA NAN KA SAN IYA KA ZA KA Iya Taimako.

  40. René, haɓaka sun fito ne saboda mun ƙaddamar da haɗin gwiwa.

  41. Ina tsammanin cewa daga waɗancan hanyoyi ba za mu iya samun haɗin gwargwado ba domin waɗannan wurare ba su da haɗin gwiwar. babban gudunmawa don raba haɗin kai tare da rikici

  42. Kyakkyawan maƙunsar, ana iya yin sa daga polygon don yin tebur tare da Rumbos, Azimuth, Distance, Azimuths tare da sanannun tushe?

Barin amsa

Your email address ba za a buga.

Wannan shafin yana amfani da Akismet don rage spam. Koyi yadda aka sarrafa bayanan bayaninka.