2 dabaru da Microstation: Gyara lalace fayiloli da matsaloli tare da DWG 3D

1 Matsala. DGW 3D fayil ya buɗe kamar dai kawai nau'ikan 2

Yawancin lokaci ne, cewa lokacin da aka bude wani fayil na 3D na DWG, tare da Microstation, yana buɗe kamar dai yana da nauyin 2 kawai.

Wannan ya faru saboda Microstation yawanci ya saita ta cikin zaɓuɓɓuka, cewa nau'in fayil (nau'in), daidai da samfurin AutoCAD, an ƙayyade shi ne girman 2.

Maganar ita ce mai sauƙi,

Tare da wannan matakan sauƙaƙe za ku iya buɗe kofin fayiloli na DWG kamar yadda kake so

su ne:

  1. Lokaci MicroStation da kuma samun akwatin maganganun MicroStation Manager (Administrator). Gungura zuwa fayil kuma zaɓi (ba tare da buɗe shi ba).

Yanzu latsa maballin {Zaɓuɓɓuka} a kasa na akwatin maganin Gudanarwa na MicroStation.

  1. Deselect akwatin rajista da ake kira "Ƙirƙirar 2D Models don Yanayin Samfurin" kuma latsa {OK}.
  2. Yanzu buɗe fayil din DWG daga Manajan MicroStation.

2 abin zamba. Gyara wani fayil na MicroStation

Matsalar da ke haifar da rushewa a MicroStation ko hana fayilolin tsarawa daga budewa zasu iya daukar nauyin ayyuka da yawa har ma sun faru a cikin karshen mako. Abubuwan kulawa ko abubuwan da suke da wuyar zaɓar (ko motsawa, kwafi ko share), matsalolin taswira, daidaitawa a matsalolin nunawa da matsalolin da suka tashi; sau da yawa bayan fayilolin kwashe daga V7 zuwa V8 ko V8i ko fitarwa tsakanin fayiloli DXF / DWG.

Yadda yake faruwa

  • Batun maganganun "Matsalar Matsala ta MicroStation" yana bayyana lokacin da kake aiki a kan fayil na zane.
  • Yana da fayiloli masu launi waɗanda ke nuna banza yayin zuƙowa ko zuƙowa.
  • Yi la'akari da akwatin maganganun da ke nuna cewa MicroStation ya sami matsala kuma ya kamata a rufe shi.
  • Gudun umarni "Fit all" a cikin wani tsari na zane kuma dukkan zane ya zama karami dot wanda yake samuwa a wani allo.
  • Ya gano cewa wasu abubuwa sun ɓace.
  • Nemo abubuwa da suke da wuya a zaɓa ko cire.
  • Yana da wasu fayiloli na zane waɗanda ba za ku iya bude ba.
  • Gano matakan da suka kasance sun ɓace daga Level Manager.
  • Cikakken shafuka bace daga fayil da aka tsara a cikin V8 ko ɗakin ɗakin karatu na sel.
  • Kuna fuskanci wahala a zane ko motsi wasu fayilolin zane a cikin aikin.

A ƙarshe, babu wani abu fiye da fayil mara kyau.

Gyara shi tare da FileFixer

FileFixer yana daya daga cikin wa] annan abubuwan wasan kwaikwayo da ke da sha'awa, tare da fasali da nufin gyara duk wani cin hanci da rashawa ko yanayin da ba shi da kyau wanda za a iya samu a cikin fayiloli na MicroStation. FileFixer ya hana "bayyanar cututtuka" da aka ambata a sama. Domin aikin da ya cancanci adadin kudi a cikin sa'o'i da alkawurra, yana da kyau saukewa.

Don sanin yadda za a sami kwafi na FileFixer don Microstation V8 ko Microstation V8i, shigar da bayananku kuma wani zai tuntube ku.

[lamba-form-7 id = "20743" title = "ContacAxiom"]

Deja un comentario

Your email address ba za a buga.

Wannan shafin yana amfani da Akismet don rage spam. Koyi yadda aka sarrafa bayanan bayaninka.